Our CamelBac Expedition Trailers are built to order at our Peterborough facility. Just like our long-standing bespoke vehicle program, every trailer is built to a very high standard and to each client’s exact specification which, of course, we are only too happy to discuss with you to help and advise the best options available to suit your requirements.
The main body is made out of high-grade aluminium sheeting that is folded and seam welded before being bolted together. This process enables all parts to be powder coated in a wide range of colours to suit our clients and makes adaption of size and spec possible.
The chassis is based on an American Adventure Trailer design but built to full EU spec here in the UK using a heavy duty box section ladder chassis, which is galvanised for a long, lasting ownership. It utilises independent trailing arms with Fox adjustable coil-over suspension so you can easily adjust it to suit load weight and type of usage. This set up gives huge advantages for ground clearance above all other trailers in the market.
A choice of wheel options are available to match the towing vehicle, however we would recommend the UK manufactured, high quality, heavy duty Weller steel wheel which has a wider, correct offset to suit the trailer. We can also incorporate the same wheel hub assemblies to match a Toyota, Jeep as well as Land Rover to enable common spare wheel usage across trailer and tow vehicle.
If you already have a roof tent and fridge or other camping or expedition kit we may be able to incorporate it into the build to save costs. Even though we are the sole UK importer of all Hannibal Safari Equipment roof tents, roof racks and awnings, if you wish to fit an alternative make and model of hard shell or soft canvas, fold over roof tent we can supply most makes due to our on-going relationships with colleagues in the industry.
We are also able to use our CamelBac concept to build one-off or multiple unit trailers to carry specialist equipment, off road and in arduous conditions or create bespoke solutions for corporate hospitality such as wild locations for shooting parties, shows etc.
We have included some sample package and equipment costs below.
BASIC CAMELBAC TRAILER COSTS
High ground clearance, adventure trailer chassis, a pair of UK made Weller, heavy duty, wide offset steel wheels shod with high quality Cooper or BFG tyres. Main trailer body of alloy construction with single, rear swing opening door and a pair of alloy, bespoke mud guards all powder coated in colour to suit client.
Further options to upgrade include a side, slide-out fridge draw and full length, rear slide out rear draw, underslung water tank, further exterior side locker and nose box storage for kitchen, gas, water pump and dual battery electrics.
HIGH CLEARANCE ADVENTURE TRAILER CHASSIS: £4,495 + VAT
Complete with independent trailing arms, Fox coilover gas shocks, road lights, over-run braking, high clearance jack. All mild steel and fully galvanized, ladder-frame chassis.
WELLER HEAVY DUTY EXPEDITION SPEC. WHEELS: £498 + VAT
Complete with MT tyres (COOPER or BFG)
MAIN TRAILER BODY: £2,995 + VAT
Complete with single rear door and mud guards all built in alloy with powder coat finish.
Total retail price of above: £7,988 + VAT
OPTIONAL DOORS AND STORAGE
LIFT UP TOP COVER DOOR: £795 + VAT
LARGE REAR OPENING REAR DRAW: £1,395
SIDE FRIDGE DRAW: £1,195 + VAT
Side pull out draw for fridges up to 90 litres with optional under draw stainless pull out work surface (Can be built into left or right hand side)
NOSE – BATTERY BOX: £795 + VAT
For additional storage above the trailer hitch or for single or double battery installation, fuse boards, isolator switch and split charger
GAS/ WATER BOX: £849 + VAT
To accommodate gas bottle and water tank filler assembly with further storage.
REWORKED MUDGUARDS: £398 + VAT
To accommodate side boxes (pair)
KITCHEN/WATER/HEATER BOX: £995 + VAT
Stainless removable work top and support leg: + VAT£149
Total retail price of above storage options: £5,702 + VAT
Other optional bespoke boxes, lift out sides, tie downs, etc: £POA
FURTHER ACCESSORIES – ROOF TENTS – AWNINGS – WATER – ELECTRICS
TELESCOPIC AWNING MOUNT: £895 + VAT
Rear telescopic corner post with gas damper to enable mounting of Hannibal Spider awning. This system gives the advantage of being totally independent of the roof tent thus allowing fitment of any type of tent or even no tent
HANNIBAL SPIDER AWNING: £752 + VAT
HANNIBAL AWNING SIDES: £425 + VAT
Bespoke side joiners, fitting etc: £299 + VAT
HANNIBAL 2 metre, family roof tent: £2,194 + VAT
HANNIBAL TOURER fly sheet: £399 + VAT
HANNIBAL TOURER sides (adapted for trailer): £POA
ROOF BARS including fitting of tent: £260 + VAT
JACK LEGS (to enable stabilisation of trailer when pitched): £398 + VAT
Total retail price of above tent/awning options: £5,622 + VAT
JERRY CAN HOLDER: £198 + VAT
Including one Jerry can (painted to match trailer)
WHEEL CARRIER: £98 + VAT
WATER TANK (including filler): £498 + VAT
WATER PUMP, PURIFIER and SHOWER: £1,098 + VAT
ELECTRICS, LIGHTING and WIRING: £2,995 + VAT
Including double battery, twin fuse boards and wiring to drive all lights, fridge, water heater and pump
NATIONAL LUNA FRIDGE: £POA (dependent on model)
COOKING HOB and GAS BOTTLE: £POA (dependent on model)
REMOVABLE FOUR-CYCLE BIKE RACK: £295 + VAT
Browse through the vast selection of similar vehicles that we have in our inventory